Build Hot Girl Summer - 96’ Geo Tracker UTV Build

crisbee1 said:
Pack a lock out full of grease and it won't work, just takes a light coat.
Freshly serviced hubs last good long time.
Gear oil gets changed when in deep water,
Down tube on a stock Sami is 2 wall, not sure about kicks, inside tube comes loose, rattles a lot and blocks ****.
Click to expand...
What are you referring to as the “down tube”?
bad zuki said:
Don't. The seals go bad over time. replace them and put a light coat of grease in there.
Click to expand...
Good to know, that would explain why I couldn’t find a set of locking hubs that had grease fittings already. Here I thought I was on to something!
posford said:
Buddy of mine has a Tracker junkyard just over the border in ME, if you wind up still needing stuff I can pass along his info.

I dig the build, I've considered scooping a decent Tracker to do something similar with.
Click to expand...
A fellow granite stater! I would definitely take that information, I’m north of the Franconia Notch.
 
between the exhaust manifold and converter.
maybe something like this...
s-l1600.webp
 
ReadSpeed said:
A fellow granite stater! I would definitely take that information, I’m north of the Franconia Notch.
Click to expand...
Oh so this would be perfect for the trails from Gorham-north, pretty cool. I'm down in the seacoast area.

NEA has a property in Grafton that I believe has trails that would be friendly for this, but need to be a member of a club to participate. The clubs I know of are more hardcore tube chassis based.
 
crisbee1 said:
between the exhaust manifold and converter.
maybe something like this...
s-l1600.webp
Click to expand...

Gotcha, yea it appears to be single wall tubing but has definitely been replaced before. The hardware is all mismatched. The white Tracker has a decent exhaust and aftermarket header on it that I’m going to utilize. I plan to move the muffler in front of the rear axle and dump it towards the ground that way it can all hide above the skid plate I have planned.
posford said:
Oh so this would be perfect for the trails from Gorham-north, pretty cool. I'm down in the seacoast area.

NEA has a property in Grafton that I believe has trails that would be friendly for this, but need to be a member of a club to participate. The clubs I know of are more hardcore tube chassis based.
Click to expand...

Absolutely, we snowmobile that entire area so I’m looking forward to trying it out in the summer.

I haven’t heard of the Grafton property. I did just hear about a place called Cathole in Claremont that looked quite fun, and I’d also like to try Rocky Mountain ATV park and Hemonds as they both have motocross tracks I could ride.
 
ReadSpeed said:
Gotcha, yea it appears to be single wall tubing but has definitely been replaced before. The hardware is all mismatched. The white Tracker has a decent exhaust and aftermarket header on it that I’m going to utilize. I plan to move the muffler in front of the rear axle and dump it towards the ground that way it can all hide above the skid plate I have planned.


Absolutely, we snowmobile that entire area so I’m looking forward to trying it out in the summer.

I haven’t heard of the Grafton property. I did just hear about a place called Cathole in Claremont that looked quite fun, and I’d also like to try Rocky Mountain ATV park and Hemonds as they both have motocross tracks I could ride.
Click to expand...
Hemonds just had their spring event memorial day weekend, I have friends that go up, I'm trying for the fall event this year but we'll see. I looks like a great time
 
posford said:
Hemonds just had their spring event memorial day weekend, I have friends that go up, I'm trying for the fall event this year but we'll see. I looks like a great time
Click to expand...
It is quite the party to my understanding, I didn’t realize they also do a Fall event. I’m going up for there 6 hour Enduro sprint in July and plan to check out the property then.
 
You must log in or register to reply here.
Top Back Refresh