Smash2.0 K5 resurrection

Moar
IMG_9897.jpeg
IMG_9898.jpeg
IMG_9901.jpeg
IMG_9902.jpeg
IMG_9904.jpeg
IMG_9911.jpeg
IMG_9912.jpeg
IMG_9913.jpeg
 
Added 2 more v-band flanges to the 2.5 tubes. Super easy to take out and install the pipes plus if I have to access the clutch slave all I have to do is take one pipe out.
Patterned the main skidplate and its large 35x43. The mounts will be on the side of the frame so nothing bolts heads sticking down. Also going to make it hook to the crossmember under the bellhousing so it will be easy to install by myself.
IMG_9986.jpeg
IMG_9987.jpeg
IMG_9988.jpeg
IMG_9989.jpeg
IMG_9990.jpeg
IMG_9992.jpeg
IMG_9994.jpeg
IMG_9996.jpeg
 
I am interested in the gear lube system for the under drive.
 
Rear lower shock mounts. The mount has a thick side the wraps under the axle to protect the e-bake cable that has to wrap underneath. Drilled and tapped the side for cable clips. In boarding the leaf springs sure did make some nice room for everything.
IMG_0040.jpeg
IMG_0041.jpeg
IMG_0043.jpeg
IMG_0042.jpeg
 
The cooler and fan unit. I just make the little brackets from 1/4” bolts and 3/16” wire. I would have mounted this underneath today but there isn’t enough room in the space it goes so I have to modify the floor a little first.
IMG_0044.jpeg
IMG_0045.jpeg
 
I'm not sure I've ever seen limit straps on a leaf sprung suspension. I hope you get enough flex to need them! :smokin:
 
JayMcJay said:
I'm not sure I've ever seen limit straps on a leaf sprung suspension. I hope you get enough flex to need them! :smokin:
Click to expand...
Cheap insurance if a main leaf snaps and heads south. Don’t want ruin a 1400$ shock or two.
 
You must log in or register to reply here.
Top Back Refresh