Issue with disc brake conversion on a 9"

Collapse
X
Collapse
First Prev Next Last
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Issue with disc brake conversion on a 9"

    Hey guys, just joined up here. Looks like the 'other place' is a barren wasteland now.

    I am working on an early bronco and going from drums to disc. I went with the BC bronco kit. Their design mounts the rotor to the inboard side of the axle flange and the wheel studs secure the rotors to the flange. The issue I have is the knurled part of the studs will not press into the holes on the axle shafts, the hole diameter is too small (or the stud is too big). They are not ford shafts, I am running 31 spline dutchman chromo shafts.

    i called up bc broncos and they sent me a second set of studs but they are exactly the same. I know the studs they use are made by dorman. So I d/l the dorman catalog and went through all the studs they make and I concluded they dont make a stud that will work for what I got.

    So I am wondering if it is possible to drill out the stud holes on the larger to take this stud? They are chrome moly but I dont know what grade, how hard, etc. Should I pull them and take them to a machine shop? Ditch this kit and put drums on? Im kinda stuck here

    thanks

    #2
    It should be no problem to drill the holes out on the shafts, you just need to figure out what size hole you need for a proper press fit. If you have a solid drill press and a good drill bit (Cobalt or carbide), you should be able to do it yourself fairly painlessly, but if you don't, or feel uncomfortable, if shouldn't be a very expensive machining job.

    I think the best answer though is to just buy the correct size wheel studs for your shafts. What size are the stud holes currently in your shafts, and what size (or part number) are the studs BC sent you?

    Comment


      #3
      Well I wanted to just find the right stud because that is the easiest option, but I went through the whole dorman catalog and did not find what I need. Then I looked through ARP and they have something that looks close but I dont think it will work.

      The studs that I got are dorman part # 610-273. Their site lists the knurled section as .625" diameter. I cant find my damn micrometer right now, but the holes on the flange are slightly larger than .500 (threads are 1/2"-20)

      I did some googlin' and searchin on youtube and it looks like it is a fairly common thing to drill holes in the hub flange. Some guys do it to install larger diameter studs and some do it for a new bolt pattern. I am a little worried about torching all my bits and possible drilling the holes out too big. I think I am just going to take the shafts, rotors and studs to a machine shop and have them take care of everything.

      Comment


        #4
        Dude if your shafts are threaded 1/2-20, and the lug studs you want to run are 1/2-20, why not just run thread-in lug studs? Drill out nothing.

        Comment


          #5
          Summit Racing $3.00 each. Versus the Dorman for like $2.20 ea.

          https://www.summitracing.com/parts/aly-99stud2

          Comment


            #6
            Sorry if that came out wrong... hub flanges are not threaded. I was referring to the threads on the studs. Hub flanges have holes slightly larger than 1/2"...

            Comment


              #7
              Originally posted by Fishnbeer View Post
              Sorry if that came out wrong... hub flanges are not threaded. I was referring to the threads on the studs. Hub flanges have holes slightly larger than 1/2"...
              Did you not have wheel studs in the axle flange before?

              Regardless, Summit sells plenty of wheel studs "slightly larger" than 1/2". https://www.summitracing.com/search/...3A1-2-20-in-rh

              Comment


                #8
                A picture might help here. The stud I need is not as common because it has a shoulder where the rotor sits and then the splined section starts. Its not a regular stud where splines meet the head. I just cant find a stud like this with the same size shoulder (I think 21/32 for the shoulder where the rotor sits) and spline diameter closer to 1/2". In the entire dorman catalog there are maybe 5 studs that are this style. There is an ARP stud that looks close but I dont want to buy $75 studs and have it not work out...

                Comment


                  #9
                  Well I decided to take a stab at it. I drilled a 9/16" hole in some 3/8 plate and it was a nice tight fit for the studs I had. So I swapped the belts on the drill press to run as slow as possible, used some 90w for cutting oil and applied light pressure. I imagined it being super tough stuff and impossible to drill, but was not too bad.

                  Comment

                  Working...
                  X