CDA 455 II
ANFAQUE2
Let's see what's in our group!
My Jalopy:
My Jalopy:
PICS OF YOUR RIG(S)
- North west
- Social group owner YotaAtieToo
- Creation date
[No message]
ryantowry_81
Well-known member
here is my current family wheeler:
91 fj80, 37 yokohama's, 5.29s, detroit rear and arb front, RCV 30 splines front, 2" homemade spacers
irate4x4.com
room for 5 and gear, coils all around for smooth fire road driving, never misses a gas station.
91 fj80, 37 yokohama's, 5.29s, detroit rear and arb front, RCV 30 splines front, 2" homemade spacers
1991 fj80- the offroad station wagon build.
So this is a copy over from MUD up to today: Nothing fancy here but I picked up this 1991 fj80 cheap to make into my full time camping/fishing with the kids mobile until I can get the 40 built. first step is to get the motor tuned up and then install the spartan i have in the rear. from there...
room for 5 and gear, coils all around for smooth fire road driving, never misses a gas station.
jawzjeep
Blah blah blah yeah whatever
You'll see me in one of these
NW CJ5
.
My '77 cj5
CDA 455 II
ANFAQUE2
My '77 cj5
Do you have the .50cal mount-plate space stamped into your tub bed?
NW CJ5
.
Nope. It's got a fiberglass tub and fenders. Steel hood, grill, and windshield frame.
crazybluerider
Squirrel!
The softroader / camping rig.
irate4x4.com
Currently undergoing an axle swap and a couple of other upgrades because the front 30 was smiling pretty good and because I can't fucking leave anything alone.
The buggy. JHF Goatbuilt Trail Buggy
TJ Camping Rig / Mild Trail Wheeler
It's probably time I got a thread going on this thing. The build has started now that my buggy is operational. It's a 2005 TJ that I purchased a little over a year ago to use as a tow behind when we go camping, I've also been doing some exploration type wheeling and camping in it. It's a 4.0l...
irate4x4.com
Currently undergoing an axle swap and a couple of other upgrades because the front 30 was smiling pretty good and because I can't fucking leave anything alone.
The buggy. JHF Goatbuilt Trail Buggy
Last edited:
CDA 455 II
ANFAQUE2
I grew up wheelin' in a '68 V6/factory odd-firing Kaiser Jeep that was bought from a Buick dealership.
Some time in the '70s or so AMC stopped using the tubs from the M38A1 design.
My 1979 work in progress.
RED.ROCK.TJ
New member
- Joined
- Nov 26, 2022
- Member Number
- 5794
- Messages
- 2
MY TJ
MotorMouth#775
Member
Was a rollover. New frame, front clip, 4.11's w/ tru tracs, and an old Ramsey that puts in work
CDA 455 II
ANFAQUE2
Updated pic
One street princess and a retired race Jeep.
CDA 455 II
ANFAQUE2
One street princess and a retired race Jeep.
Where'd you get your tires?
These guys, $300 per but they're all relatively fresh compared to typical mil-surp tires, IIRC the oldest date code on my set was 2019. One even showed up with a 12 bolt HMMWV wheel in it, I'm guessing to keep other stuff from falling inside the stack during shipment.
FELTZ TIRE | eBay Stores
We specialize in high-quality surplus military tires with large quantities of many sizes and styles available. We also stock most modern military wheels, ranging from the 20" x 10" steel wheels commonly used as super singles on 5-ton's and LMTV's, to the 16.5's used on the HMMWV. We take all...
www.ebay.com
guy in Idaho
New member
CDA 455 II
ANFAQUE2
Current set up:
CDA 455 II
ANFAQUE2
As it currently sits:
I guess technically I added a rig the other day. Not sure what I'll do with it as far as building but I kept it out the scrap yard at any rate.
Are you in Billings? I took this pic in October of 2016 near Tacoma screw products. I think it was the building next to it during a car auction.Mix year FJ40
great grandmothers 1947 CJ2A
